Experimental Ceramic Ball Mill

Experimental ceramic ball mill

Product introduction: Experimental ceramic ball mill is a ball mill made of ceramic lining plate, small capacity, generally suitable for small batch production of product trial production stage.

Production capacity: 0.015-0.5 tons/time

Model: Φ600×600-Φ1300×1500mm

Speed: 33-42(r/min)

Application: Mainly used for material mixing, grinding, product fineness uniformity, energy saving. It can be dry or wet ground.

Experimental ceramic ball mill product introduction

The diameter of the experimental ceramic ball mill is between Φ600×600-Φ1300×1500mm, equipped with the main motor 2.2-7.5kW, which is suitable for grinding experiments in various enterprises and colleges.

Outstanding advantage

1, the type of liner can be changed: ceramic ball mill according to the production of different materials, can use different liner to meet different needs;

2, wide range of application: In addition to grinding materials, ceramic ball mill can also be used in large stone factory for medium crushing, fine crushing and ultra-fine crushing of materials, and can process a variety of ores;

3, good energy saving: ceramic ball mill in the work can be self-vacuum start, reduce the starting current, so more energy saving;

4, uniform product particle size: Because the ceramic ball mill discharge port has a grate to control its discharge particle size, too large material is difficult to discharge from the discharge port, so the product large material content is less, and the material particles that meet the requirements are more.

Working principle

Experimental ceramic ball mill as the center drive, intermittent discharge type ball mill. When the body rotates, the material is highly crushed due to the impact and grinding of the moving hard grinding body. When grinding is stopped, the crushed material is discharged through the unloading mill door.

Technical parameter