Mineral processing equipment/Complete set of metal mineral processing equipment/Catalogue
Turn waste into treasure: phosphate ore from iron tailings, open a new chapter in resource recycling!With the depletion of mineral resources and the increasing awareness of environmental protection, how to effectively use resources and reduce environmental pollution has become a major issue facing t
To distinguish the difference between the four, let's first understand what these four products are:First, caustic soda
Fish meal/fish oil production line/equipment/production plant
Pet food production line/Pet wet food /Dry pet food/ Dog food/cat food/ham
PP/PA/PPA/PBT Thermoplastic Resin Extruders/Extrusion Line Series/Blister Thermoforming Series/crushing RecoveryProduct introduction
Availability: | |
---|---|
Quantity: | |
Strontium carbonate production line
The source of strontium in strontium carbonate is mainly azulite ore (SrSO4), with a small amount of strontium ore (SrCO3) and associated ore (a mixture of strontium sulfate and strontium carbonate). It is a very important inorganic industrial product, will be mainly used in the electronics industry as a magnetic material, because it has a good shielding effect on rays, so it can be used as a color TV picture tube surface coating material. In addition, it is also widely used in ceramics, medicine and chemical industry. Now, with the rapid development of the electronics industry at home and abroad, the demand for high-purity strontium carbonate products in the industry has also increased correspondingly.
Raw materials used in production: lapis lazuli
Calcination temperature: 1100-1200℃
Main equipment: rotary kiln, feeder, crusher, ball mill
Outstanding advantage
1, experimental analysis: the company's pilot test line can carry out a variety of raw material analysis, formula design, sample preparation, roasting, pilot test, pilot test;
2, the preparation of high purity strontium carbonate, high quality, stable quality;
3, simple process, easy operation, low production cost, no environmental pollution.
Process flow
Lapis lazulis and pulverized coal are crushed and used as raw materials through 20 purpose, the ratio of ore to coal is 1:0.6 ~ 1:0.7, and the reduction roasting at the temperature of 1100 ~ 1200℃, after 0.5 ~ 1.0h, the roasting is leached twice, once washed, the leaching temperature is 90℃, each time for 3h, the total leaching rate can reach 82%, and the leaching solution is filtered. Strontium carbonate is further recovered after hydrochloric acid leaching of the filter residue, and the filtrate is added with mirabarite solution to remove barium, and then ammonium bicarbonate or sodium carbonate solution is added for reaction to produce strontium carbonate precipitation (or directly carbonized with carbon dioxide), and then separated, dried and pulverized by ball milling to obtain strontium carbonate.
Strontium carbonate production line
The source of strontium in strontium carbonate is mainly azulite ore (SrSO4), with a small amount of strontium ore (SrCO3) and associated ore (a mixture of strontium sulfate and strontium carbonate). It is a very important inorganic industrial product, will be mainly used in the electronics industry as a magnetic material, because it has a good shielding effect on rays, so it can be used as a color TV picture tube surface coating material. In addition, it is also widely used in ceramics, medicine and chemical industry. Now, with the rapid development of the electronics industry at home and abroad, the demand for high-purity strontium carbonate products in the industry has also increased correspondingly.
Raw materials used in production: lapis lazuli
Calcination temperature: 1100-1200℃
Main equipment: rotary kiln, feeder, crusher, ball mill
Outstanding advantage
1, experimental analysis: the company's pilot test line can carry out a variety of raw material analysis, formula design, sample preparation, roasting, pilot test, pilot test;
2, the preparation of high purity strontium carbonate, high quality, stable quality;
3, simple process, easy operation, low production cost, no environmental pollution.
Process flow
Lapis lazulis and pulverized coal are crushed and used as raw materials through 20 purpose, the ratio of ore to coal is 1:0.6 ~ 1:0.7, and the reduction roasting at the temperature of 1100 ~ 1200℃, after 0.5 ~ 1.0h, the roasting is leached twice, once washed, the leaching temperature is 90℃, each time for 3h, the total leaching rate can reach 82%, and the leaching solution is filtered. Strontium carbonate is further recovered after hydrochloric acid leaching of the filter residue, and the filtrate is added with mirabarite solution to remove barium, and then ammonium bicarbonate or sodium carbonate solution is added for reaction to produce strontium carbonate precipitation (or directly carbonized with carbon dioxide), and then separated, dried and pulverized by ball milling to obtain strontium carbonate.