ZKL Series Pot Granulator

ZKL series pot granulator

Our boiler granulator has low energy consumption, easy control of pellet size and good strength. Its pan diameter from 2.2m-4.5m, speed 12-24 (r/min), supporting motor power 15-155kW, can meet the needs of 1-22 tons per hour granulation production.

Capacity: 1-22 (t/h)

Model: φ2.2-φ4.5 (m)

Applicable materials: bauxite, shale, clay, sludge, fly ash, slag, phosphate powder (or phosphorus tailings), phosphogypsum, etc

Application: Used in petrochemical, construction, fire insulation and other industries.

ZKL series pot granulator product introduction

The boiler granulator produced by our company is based on bauxite, shale, clay, sludge, fly ash, slag, phosphate rock powder (or phosphorus tailings), phosphogypsum and other raw materials for granulation equipment, with uniform pellet size, high yield, compact equipment structure, easy control, smooth operation and other characteristics, can be widely used in petrochemical, construction, fire insulation and other fields.

Outstanding advantage

1, high ball formation rate, and finished material ball size uniform, high strength;

2, the use of frequency control motor, easy to adjust the speed according to the process needs;

3, granulator base adopts integrated structure design, smooth operation, low noise;

4, low fault, high production efficiency, long service life.

Working principle

The working principle of the granulator is that the transmission device drives the pan body to rotate through the bridge device, and the pan body axis and the horizontal surface are at a specific Angle; When the powder is added to the pot body through the feed port, water is sprayed into the pot body. While the wet powder is rolling, the ball core is gradually formed. Under the continuous rolling, friction and collision, the ball core with the wet surface gradually grows into pellets.

Technical parameter